Sugar Mill Cutter Heads
'H' Type Cutter Heads - for Tubes/Pipes 1.1/4"-4" (31.7mm-101.6mm) I.D.
Single Layer 'H' Tool
Two Layer 'H' Tool
Three Layer 'H' Tool
These Cutter Heads are designed for cleaning straight and curved tubes as found in Boilers, Air Heaters, Economizers, etc. Cutter Heads are provided with 3 cutter wheels, one each of straight teeth, teeth cut right hand, teeth cut left hand, for quicker cleaning and prevention of scale grooving.
| Model No. |
Tube I.D. | Cutter Wheels Set (3) |
Spare Spindle | |
|---|---|---|---|---|
| mm | inch | Model No. | Model No. | |
| H-10 | 31.7 | 1.1/4 | HSRL-1 | HA-1 |
| H-11 | 35.0 | 1.3/8 | HSRL-1 | HA-1 |
| H-12 | 38.1 | 1.1/2 | HSRL-1 | HA-1 |
| H-13 | 41.3 | 1.5/8 | HSRL-2 | HA-2 |
| H-14 | 44.5 | 1.3/4 | HSRL-2 | HA-2 |
| H-15 | 47.6 | 1.7/8 | HSRL-2 | HA-2 |
| H-16 | 51.0 | 2 | HSRL-2 | HA-2 |
| H-17 | 54.0 | 2.1/8 | HSRL-2 | HA-2 |
| H-18 | 57.1 | 2.1/4 | HSRL-3 | HA-3 |
| H-20 | 63.5 | 2.1/2 | HSRL-3 | HA-3 |
| H-22 | 70.0 | 2.3/4 | HSRL-4 | HA-3 |
| H-24 | 76.2 | 3 | HSRL-4 | HA-3 |
| H-26 | 82.5 | 3.1/4 | HSRL-5 | HA-3 |
| H-28 | 88.9 | 3.1/2 | HSRL-5 | HA-3 |
| H-30 | 95.2 | 3.3/4 | HSRL-6 | HA-4 |
| H-32 | 101.6 | 4 | HSRL-6 | HA-4 |
'HZ' Type Cutter Heads - for Tubes/Pipes 1.1/4"-2" (31.7mm-51.0mm) I.D.
Close 'HZ' Tool (HZ-10 to HZ-11)
Open 'HZ' Tool (HZ-11A to HZ-16)
These spring loaded, self expanding Cutter Heads are designed for rapid removal of hard and obstinate scale formation in straight tubes as found in Evaporators, Juice Heaters, etc. It consists of 3 bevel, 4 straight cutter wheels, 4 left cutter wheels and 4 right cutter wheels, fitted on three bridge type arms.
| Model No. | Tube I.D. | Cutter Wheels Set (15) |
Spare Arms | |
|---|---|---|---|---|
| mm | inch | Model No. | Model No. | |
| HZ-10 | 31.7 | 1.1/4 | HZSRL-1 | HZA-1 |
| HZ-10A | 33.3 | 1.5/16 | HZSRL-1 | HZA-1 |
| HZ-11 | 35.0 | 1.3/8 | HZSRL-1 | HZA-1 |
| HZ-11A | 36.5 | 1.7/16 | HZSRL-1 | HZA-2 |
| HZ-12 | 38.1 | 1.1/2 | HZSRL-1 | HZA-2 |
| HZ-12A | 39.7 | 1.9/16 | HZSRL-1 | HZA-2 |
| HZ-13 | 41.3 | 1.5/8 | HZSRL-1 | HZA-2 |
| HZ-13A | 42.9 | 1.11/16 | HZSRL-1 | HZA-2 |
| HZ-14 | 44.5 | 1.3/4 | HZSRL-2 | HZA-3 |
| HZ-14A | 46.0 | 1.13/16 | HZSRL-2 | HZA-3 |
| HZ-15 | 47.6 | 1.7/8 | HZSRL-2 | HZA-3 |
| HZ-15A | 49.2 | 1.15/16 | HZSRL-2 | HZA-3 |
| HZ-16 | 51.0 | 2 | HZSRL-2 | HZA-3 |
'WA' Type Cutter Heads - for Tubes/Pipes 1.1/2"-4" (38.1mm-101.6mm) I.D.
These Cutter Heads produce excellent results in curved or straight tubes. Pivoted arms of Cutter Heads swing out by centrifugal force so that the cutters contact every part of the tube wall.
| Model No. | Tube I.D. | ConeCutter Set (3) |
Spare Arms | Universal Joint | |
|---|---|---|---|---|---|
| mm | inch | Model No. | Model No. | Model No. | |
| WA-12 | 38.1 | 1.1/2 | WAL-1 | WAA-1 | WAUJ-1 |
| WA-14 | 44.5 | 1.3/4 | WAL-1 | WAA-1 | WAUJ-1 |
| WA-16 | 51.0 | 2 | WAL-1 | WAA-1 | WAUJ-1 |
| WA-18 | 57.1 | 2.1/4 | WAL-2 | WAA-1 | WAUJ-2 |
| WA-20 | 63.5 | 2.1/2 | WAL-2 | WAA-1 | WAUJ-2 |
| WA-22 | 70.0 | 2.3/4 | WAL-2 | WAA-1 | WAUJ-2 |
| WA-24 | 76.2 | 3 | WAL-3 | WAA-2 | WAUJ-2 |
| WA-28 | 88.9 | 3.1/2 | WAL-3 | WAA-2 | WAUJ-2 |
| WA-32 | 101.6 | 4 | WAL-4 | WAA-2 | WAUJ-2 |
'SA' Type Cutter Heads - for Tubes/Pipes 2"-4" (51.0mm-101.6mm) I.D.
These Cutter Heads have 3 to 5 freely pivoted arms, activated centrifugally, which swing out to give access to any part of tube wall.
| Model No. | Tube I.D. | Cone & Flat Cutter Set (9) |
Arms | Universal Joint | |
|---|---|---|---|---|---|
| mm | inch | Model No. | Model No. | Model No. | |
| SA-16 | 51.0 | 2 | SAFC-1 | SAA-1 | SAUJ-1 |
| SA-18 | 57.1 | 2.1/4 | SAFC-2 | SAA-2 | SAUJ-2 |
| SA-20 | 63.5 | 2.1/2 | SAFC-2 | SAA-2 | SAUJ-2 |
| SA-22 | 70.0 | 2.3/4 | SAFC-3 | SAA-2 | SAUJ-2 |
| SA-24 | 76.2 | 3 | SAFC-3 | SAA-2 | SAUJ-2 |
| SA-28 | 88.9 | 3.1/2 | SAFC-4 | SAA-2 | SAUJ-2 |
| SA-32 | 101.6 | 4 | SAFC-5 | SAA-3 | SAUJ-2 |